Blind Squirrel

#!/bin/bash
#
# Startup script for Jakarta Tomcat
# Script should work on Ubuntu Linux.
# WARNING: The script does not allow to run Tomcat on privileged ports as non root user. 
# For this use case try : http://tomcat.apache.org/tomcat-6.0-doc/setup.html and http://commons.apache.org/daemon/jsvc.html
# 
# Should start normally after the databases and before http server
# chkconfig: 345 80 10
# description: Jakarta Tomcat Java Servlet/JSP Container
# processname: tomcat
# pidfile: /var/run/tomcat/tomcat.pid
 
##### In this area you can find settings which are likely to change frequently ####
 
JAVA=/opt/java/current/bin/java
# unprivileged user running Tomcat server
tomcatuser=tomcat
 
# servicename used as pidfile and lockfile name, must correspond to 'processname:' at the top of this file
# If not linux will not detect the running service during runlevel switch and will not shut it down normally
servicename=tomcat
 
# folder where Tomcat is installed
CATALINA_HOME=/opt/tomcat
 
# Options for the JVM
JAVA_OPTS="$JAVA_OPTS -Xms1024m -Xmx2048m -XX:MaxPermSize=512m -XX:PermSize=128m"
JAVA_OPTS="$JAVA_OPTS -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:ParallelGCThreads=4 JAVA_OPTS="-Djavax.servlet.request.encoding=UTF-8 -Djavax.servlet.response.encoding=UTF-8 -Dfile.encoding=UTF-8 $JAVA_OPTS"
 
##### End of frequent settings area #####
 
pidfile=/var/run/tomcat/$servicename
lockfile=/var/lock/$servicename
 
#runsecure=1 #starts tomcat with java security
runsecure=0
 
# Optional additional libs you would like to add to the classpath (= JVM Option -classpath)
CLASSPATH=""
# Optional Java Security Socket extension
# CLASSPATH="$CLASSPATH":"$JSSE_HOME"/lib/jcert.jar:"$JSSE_HOME"/lib/jnet.jar:"$JSSE_HOME"/lib/jsse.jar
 
# path to Tomcat lib
CLASSPATH="$CLASSPATH":"$CATALINA_HOME"/bin/bootstrap.jar
 
# Directory holding configuration, defaults to CATALINA_HOME
# In a Tomcat cluster you might reuse the servicename to identify the base directory
 
CATALINA_BASE="$CATALINA_HOME"
# server log during startup / shutdown
logfile=$CATALINA_BASE/logs/catalina.out
# endorsed allows to overwrite JVM libs -> JVM option -Djava.endorsed.dirs 
#JAVA_ENDORSED_DIRS="$CATALINABASEDIR"/endorsed
 
# Define the java.io.tmpdir to use for Catalina
CATALINA_TMPDIR="$CATALINA_BASE"/temp
 
# Set juli LogManager if it is present
if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then
  JAVA_OPTS="$JAVA_OPTS -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
  LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
fi
 
#### End of settings #####
 
# build java command to start Tomcat
command="$JAVA $JAVA_OPTS $LOGGING_CONFIG $CATALINA_OPTS $LOGGING_CONFIG \
      -Djava.endorsed.dirs=$JAVA_ENDORSED_DIRS -classpath $CLASSPATH \
      -Dcatalina.base=$CATALINA_BASE \
      -Dcatalina.home=$CATALINA_HOME \
      -Djava.io.tmpdir=$CATALINA_TMPDIR" 
 
if [ "$runsecure" = "1" ]; then
  command="$command -Djava.security.manager -Djava.security.policy=$CATALINA_BASE/conf/catalina.policy"
fi
 
command="$command org.apache.catalina.startup.Bootstrap"
 
 
start()
{
	echo $"Starting $servicename based at $CATALINA_BASE "
 
	daemon --user=$tomcatuser --pidfile=$pidfile --output=$logfile -- $command start
	RETVAL=$?
 
	[ "$RETVAL" = 0 ] && touch $lockfile
	echo
}
 
stop()
{
	echo -n $"Stopping $prog: "
	if [ ! -r $pidfile ]; then
		echo "Pidfile $pidfile cannot be read"
		RETVAL=1
		return
	fi
	# Sends TERM signal first and kills finally after 10 seconds
	start-stop-daemon --pidfile $pidfile -R 10 --stop
	RETVAL=$?
	[ $RETVAL = 0 ] && rm -f ${lockfile} ${pidfile}
	echo
}
 
version()
{
	$JAVA -classpath $CATALINA_HOME/lib/catalina.jar org.apache.catalina.util.ServerInfo
	RETVAL=$?
}
 
case "$1" in
	start)
		start
		;;
	stop)
		stop
		;;
	restart)
		stop
		start
		;;
	version)
		version
		;;
	status)
		status -p $pidfile $servicename
		RETVAL=$?
		;;
	*)
		echo $"Usage: $0 {start|stop|restart|version|status}"
		RETVAL=1
esac
exit $RETVAL

$ sudo /sbin/mdadm -QD /dev/md0
/dev/md0:
        Version : 00.90.03
  Creation Time : Fri Jun 19 06:16:37 2009
     Raid Level : raid1
     Array Size : 104320 (101.89 MiB 106.82 MB)
  Used Dev Size : 104320 (101.89 MiB 106.82 MB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 0
    Persistence : Superblock is persistent
 
    Update Time : Wed Sep 16 00:22:58 2009
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0
 
           UUID : b185a678:1789acb9:327678ee:0f02177d
         Events : 0.14
 
    Number   Major   Minor   RaidDevice State
       0       3        1        0      active sync   /dev/hda1
       1       3       65        1      active sync   /dev/hdb1

$ xrandr -q
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
VGA1 connected 1680x1050+1280+0 (normal left inverted right x axis y axis) 474mm x 296mm
   1680x1050      60.0*+
   1280x1024      75.0
   1152x864       75.0
   1024x768       75.1     70.1     60.0
   832x624        74.6
   800x600        72.2     75.0     60.3     56.2
   640x480        72.8     75.0     66.7     60.0
   720x400        70.1
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
   1280x800       60.0*+
   1024x768       60.0
   800x600        60.3
   640x480        59.9
DP1 disconnected (normal left inverted right x axis y axis)

# If an external monitor is connected, place it with xrandr
 
# External output may be "VGA" or "VGA-0" or "DVI-0" or "TMDS-1"
EXTERNAL_OUTPUT="VGA1"
INTERNAL_OUTPUT="LVDS1"
# EXTERNAL_LOCATION may be one of: left, right, above, or below
EXTERNAL_LOCATION="right"
 
case "$EXTERNAL_LOCATION" in
       left|LEFT)
               EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
               ;;
       right|RIGHT)
               EXTERNAL_LOCATION="--right-of $INTERNAL_OUTPUT"
               ;;
       top|TOP|above|ABOVE)
               EXTERNAL_LOCATION="--above $INTERNAL_OUTPUT"
               ;;
       bottom|BOTTOM|below|BELOW)
               EXTERNAL_LOCATION="--below $INTERNAL_OUTPUT"
               ;;
       *)
               EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
               ;;
esac
 
xrandr |grep $EXTERNAL_OUTPUT | grep " connected "
if [ $? -eq 0 ]; then
    xrandr --output $EXTERNAL_OUTPUT --off
    xrandr --output $INTERNAL_OUTPUT --auto --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION
    # Alternative command in case of trouble:
    # (sleep 2; xrandr --output $INTERNAL_OUTPUT --auto --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION) &
else
    xrandr --output $INTERNAL_OUTPUT --auto --output $EXTERNAL_OUTPUT --off
fi